gamma number—Number of consecutive valid ICP cells for IFSM.
Range: 1 through 5
Default: 1
minimum-links number—IMA group minimum active links.
Range: 1 through 8
Default: 1
symmetry (symmetrical-config-and-operation |
symmetrical-config-asymmetrical-operation)—IMA group symmetry mode selection.
test-procedure—Specify an IMA link interface test.
ima-test-start—Start IMA group test.
ima-test-stop—Stop IMA group test.
interface name—Interface name of the IMA link to test.
pattern number—IMA test pattern.
Range: 1 through 254
Default: 170
period seconds—Length of IMA pattern test in seconds.
Range: 1 through 4,294,967,294.
Default: 10
transmit-clock (common |independent)—Transmit clock configuration.
Default: common
version (1.0 |1.1)—IMA specification version.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• ATM Support on Circuit Emulation PICs Overview
• ima-link-options on page 1559
• Understanding Inverse Multiplexing for ATM
Copyright © 2017, Juniper Networks, Inc.1558
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
