To export LAN routes, include the lan option. To export point-to-point routes, include
the point-to-point option.
Only local routes on point-to-point interfaces configured with a destination address are
exportable.
Options inet—Specify the IPv4 address family.
inet6—Specify the IPv6 address family.
lan—Export LAN routes.
point-to-point—Export point-to-point routes.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Example: Importing Direct and Static Routes Into a Routing Instance
• Example: Configuring Multiple Routing Instances of OSPF
• passive on page 1654
1575Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
