command ensures that the MAC entries are re-learned and in synchronization
between both the peers.
Options limit—Specify the maximum number of addresses in the MAC address table.
Range: 16 through 1,048,575 MAC addresses
Default: 5120 MAC addressesThere is no default MAC address limit for the mac-table-size
statement at the [edit switch-options] hierarchy level. The number of MAC addresses
that can be learned is only limited by the platform, 65,535 MAC addresses for EX
Series switches and 1,048,575 MAC addresses for other devices.
The remaining statement is explained separately. See CLI Explorer.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Layer 2 Learning and Forwarding for Bridge Domains Overview
• Layer 2 Learning and Forwarding for VLANs Overview
• Layer 2 Learning and Forwarding for Bridge Domains Functioning as Switches with Layer
2 Trunk Ports
• Layer 2 Learning and Forwarding for VLANs Acting as a Switch for a Layer 2 Trunk Port
Copyright © 2017, Juniper Networks, Inc.1592
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
