Juniper ACX2000 Configuration Guide

NOTE: When the number of routes reaches the threshold value, routes are
still installed into the routing table while warning messages are sent. When
the number of routes reaches the path-limit value, then additional routes are
rejected.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Limiting the Number of Paths and Prefixes Accepted from CE Routers in Layer 3 VPNs
on page 841
1607Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English