Juniper ACX2000

mode (bidirectional-sparse | bidirectional-sparse-dense | dense | sparse |
sparse-dense);
neighbor-policy [ policy-names ];
override-interval milliseconds;
priority number;
propagation-delay milliseconds;
reset-tracking-bit;
version version;
}
join-load-balance;
join-prune-timeout;
mdt {
data-mdt-reuse;
group-range multicast-prefix;
threshold {
group group-address {
source source-address {
rate threshold-rate;
}
}
tunnel-limit limit;
}
}
mvpn {
autodiscovery {
inet-mdt;
}
}
nonstop-routing;
override-interval milliseconds;
propagation-delay milliseconds;
reset-tracking-bit;
rib-group group-name;
rp {
auto-rp {
(announce | discovery | mapping);
(mapping-agent-election | no-mapping-agent-election);
}
bidirectional {
address address {
group-ranges {
destination-ip-prefix</prefix-length>;
}
hold-time seconds;
priority number;
}
}
bootstrap {
family (inet | inet6) {
export [ policy-names ];
import [ policy-names ];
priority number;
}
}
bootstrap-import [ policy-names ];
bootstrap-export [ policy-names ];
1663Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements