Juniper ACX2000 Configuration Guide

BEST PRACTICE: On inline service (si) interfaces for L2TP, only the chap and
pap statements are typically used for subscriber management. We
recommend that you leave the other statements subordinate to
ppp-options—including those subordinate to chap and pap—at their default
values.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring the PPP Challenge Handshake Authentication Protocol on page 493
• Applying PPP Attributes to L2TP LNS Subscribers per Inline Service Interface
1673Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English