Juniper ACX2000 Configuration Guide

Originator Remote Node ID
No 00:01:01:00:00:01
user@node2> show protection-group ethernet-ring interface
Ethernet ring port parameters for protection group pg102
Interface Control Channel Forward State Ring Protection Link End
ge-1/2/1 ge-1/2/1.1 forwarding No
ge-1/0/2 ge-1/0/2.1 forwarding No
Signal Failure Admin State
Clear IFF ready
Clear IFF ready
user@node2> show protection-group ethernet-ring node-state
Ethernet ring APS State Event Ring Protection Link Owner
pg102 idle NR-RB No
Restore Timer Quard Timer Operation state
disabled disabled operational
user@node2> show protection-group ethernet-ring statistics group-name pg102
Ethernet Ring statistics for PG pg101
RAPS sent : 0
RAPS received : 1
Local SF happened: : 0
Remote SF happened: : 0
NR event happened: : 0
NR-RB event happened: : 1
Failure Situation—RPL Owner Node
If the ring has a link failure between Node 2 and Node 3, the show command will have
the following outputs for Node 1:
user@node1> show protection-group ethernet-ring aps
Ethernet Ring Name Request/state No Flush Ring Protection Link Blocked
pg101 SF NO No
Originator Remote Node ID
No 00:01:02:00:00:01
user@node1> show protection-group ethernet-ring interface
Ethernet ring port parameters for protection group pg101
Interface Control Channel Forward State Ring Protection Link End
ge-1/0/1 ge-1/0/1.1 forwarding Yes
ge-1/2/4 ge-1/2/4.1 forwarding No
Signal Failure Admin State
Clear IFF ready
Clear IFF ready
user@node1> show protection-group ethernet-ring node-state
Ethernet ring APS State Event Ring Protection Link Owner
pg101 protected SF Yes
Restore Timer Quard Timer Operation state
disabled disabled operational
user@node1> show protection-group ethernet-ring statistics group-name pg101
Ethernet Ring statistics for PG pg101
RAPS sent : 1
Copyright © 2017, Juniper Networks, Inc.126
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English