EasyManuals Logo

Juniper ACX2000 Configuration Guide

Juniper ACX2000
3270 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1877 background imageLoading...
Page #1877 background image
Peer: 10.255.7.250+179 AS 10 Local: 10.255.7.248+63740 AS 10
Group: toAsbr2 Routing-Instance: master
Forwarding routing-instance: toAs2
Type: Internal State: Established Flags: <Sync>
Last State: OpenConfirm Last Event: RecvKeepAlive
Last Error: None
Export: [ redist_static ]
Options: <Preference LocalAddress PeerAS Refresh>
Options: <AdvertiseBGPStatic>
Local Address: 10.255.7.248 Holdtime: 90 Preference: 170 Outbound Timer: 50
Number of flaps: 0
Peer ID: 10.255.7.250 Local ID: 10.255.7.248 Active Holdtime: 90
Keepalive Interval: 30 Group index: 0 Peer index: 0
BFD: disabled, down
NLRI for restart configured on peer: inet-unicast
NLRI advertised by peer: inet-unicast
NLRI for this session: inet-unicast
Peer supports Refresh capability (2)
Stale routes from peer are kept for: 300
Peer does not support Restarter functionality
NLRI that restart is negotiated for: inet-unicast
NLRI of received end-of-rib markers: inet-unicast
NLRI of all end-of-rib markers sent: inet-unicast
Peer supports 4 byte AS extension (peer-as 10)
Peer does not support Addpath
NLRI that we support extended nexthop encoding for: inet-unicast
NLRI that peer supports extended nexthop encoding for: inet-unicast
Table inet.0 Bit: 10000
RIB State: BGP restart is complete
Send state: in sync
Active prefixes: 1
Received prefixes: 1
Accepted prefixes: 1
Suppressed due to damping: 0
Advertised prefixes: 1
Last traffic (seconds): Received 9 Sent 5 Checked 5
Input messages: Total 36 Updates 2 Refreshes 0 Octets 718
Output messages: Total 37 Updates 1 Refreshes 0 Octets 796
Output Queue[0]: 0 (inet.0, inet-unicast)
Peer: 10.255.162.214+52193 AS 100 Local: 10.255.167.205+179 AS 100
Type: Internal State: Established (route reflector client)Flags: <Sync>
Last State: OpenConfirm Last Event: RecvKeepAlive
Last Error: None
Options: <Preference LocalAddress Cluster AddressFamily Rib-group Refresh>
Address families configured: inet-unicast inet-vpn-unicast route-target
Local Address: 10.255.167.205 Holdtime: 90 Preference: 170
Number of flaps: 0
Peer ID: 10.255.162.214 Local ID: 10.255.167.205 Active Holdtime: 90
Keepalive Interval: 30 Group index: 0 Peer index: 1
show bgp neighbor (CLNS)
user@host> show bgp neighbor
Peer: 10.245.245.1+179 AS 200 Local: 10.245.245.3+3770 AS 100
Type: External State: Established Flags: <ImportEval Sync>
Last State: OpenConfirm Last Event: RecvKeepAlive
Last Error: None
Options: <Multihop Preference LocalAddress HoldTime AddressFamily PeerAS
Rib-group Refresh>
1819Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Table of Contents

Other manuals for Juniper ACX2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper ACX2000 and is the answer not in the manual?

Juniper ACX2000 Specifications

General IconGeneral
BrandJuniper
ModelACX2000
CategoryNetwork Router
LanguageEnglish

Related product manuals