Accepted prefixes: 7
Suppressed due to damping: 0
show bgp neighbor orf neighbor-address detail
user@host > show bgp neighbor orf 192.168.165.56 detail
Peer: 192.168.165.56+179 Type: External
Group: ext1
inet-unicast
Filter updates recv: 1 Immediate: 1
Filter: prefix-based receive
Received filter entries:
seq 1: prefix 2.2.2.2/32: minlen 32: maxlen 32: match deny:
inet6-unicast
Filter updates recv: 0 Immediate: 1
Filter: prefix-based receive
Received filter entries:
*:*
show bgp neighbor logical-system
user@host > show bgp neighbor logical-system ITR1
Peer: 10.79.8.2+179 AS 65536 Local: 10.79.8.1+50891 AS 65500
Description: MX1
Type: External State: Established Flags: <ImportEval Sync>
Last State: OpenConfirm Last Event: RecvKeepAlive
Last Error: None
....
Table inet.0 Bit: 10000
RIB State: BGP restart is complete
Send state: in sync
Active prefixes: 1
Received prefixes: 1
Accepted prefixes: 1
Suppressed due to damping: 0
Advertised prefixes: 10
Stale prefixes: 4: <=new, line only appears if count is non-0
It is the Number of prefixes marked as stale;
LLGR-stale prefixes: 5: <=new, line only appears if count is non-0
It is the Number of prefixes marked as LLGR-stale
show bgp neighbor output-queue
user@host > show bgp neighbor output-queue
Peer: 192.0.2.2+179 AS 103 Local: 192.0.2.1+50799 AS 102
Output Queue[0]: 0 (inet.0, inet-unicast)
Priority 1 : 0
Priority 2 : 0
Priority 3 : 0
Priority 4 : 0
Priority 5 : 0
Priority 6 : 0
Priority 7 : 0
Priority 8 : 0
Priority 9 : 0
Priority 10: 0
Priority 11: 0
Priority 12: 0
Copyright © 2017, Juniper Networks, Inc.1826
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
