Juniper ACX2000 Configuration Guide

Table 115: show bgp replication Output Fields
Field DescriptionField Name
State of BGP precision timer feature in the kernel.
• Registered—BGP registers with the precision-timer feature in the kernel for auto keepalive
generation after switchover.
• NotRegistered—Keepalive format of BGP is not registered.
Precision timer
registration
State of the current internal BGP state replication session, Up or Down, and the duration for which
the session has been in the indicated state.
session state
Total number of flaps that occurred.flaps
Current state of the protocol operation, Active, Connect, Idle, and the duration for which the protocol
has been in the indicated state.
protocol state
Synchronization state at the time of executing the command. The states can be:
• Idle
• Neighbor—Indicates that the neighbor state synchronization is in progress.
• AckWait—Indicates that the request processing is over.
• ORF—Indicates that the outbound routing filter synchronization is in progress.
• RIB—Indicates that the routing table synchronization is in progress.
• Complete
synchronization state
Total number of peers waiting for various messages:
• AckWait—Number of peers waiting for a connection establishment or completed acknowledgment
messages.
• SoWait—Number of peers waiting for TCP socket-related operations.
• Scheduled—Number of peers being synchronized.
number of peers waiting
Number of various types of messages that have been sent since internal replication session became
active:
• Open—Number of Open messages sent.
• Establish—Number of connection establishment acknowledgment messages sent.
• Update—Number of update messages sent.
• Error—Number of error messages sent.
• Complete—Number of connection complete acknowledgment messages sent.
messages sent
Total number of messages received:
• Open—Number of Open messages received.
• Request—Number of request messages received:
• Wildcard—Number of requests received that used wildcards in the target address.
• Targeted—Number of requests received that used a specific address.
• EstablishAck—Number of connection establishment acknowledgement messages received.
• CompleteAck—Number of connection completed acknowledgement messages received.
messages received
1829Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English