Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced in Junos OS Release 9.6 for the TX Matrix Plus router.
Command introduced in Junos OS Release 11.1 for the QFX Series.
Command introduced in Junos OS Release 12.1 for the PTX Series Packet Transport
Routers.
Command introduced in Junos OS Release 12.2 for the ACX Series Universal Access
Routers.
Command introduced in Junos OS Release 12.3 for MX 2010 and MX2020 3D Universal
Edge Routers.
Command introduced in Junos OS Release 13.2 for MX104 3D Universal Edge Routers.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
satellite option introduced in Junos OS Release 14.2R3 for Junos Fusion.
Command introduced in Junos OS Release 17.2 for MX2008 3D Universal Edge Routers.
Command introduced in Junos OS Release 17.2 for PTX10008 Routers.
Command introduced in Junos OS Release 17.2 for vMX on NFX250 Network Services
Platform.
Command introduced in Junos OS Release 17.3 for MX10003 3D Universal Edge Routers.
Description Display information about the conditions that have been configured to trigger alarms.
Options none—Display information about the conditions that have been configured to trigger
alarms.
all-members—(MX Series routers only) (Optional) Display information about alarm
conditions for all the member routers of the Virtual Chassis configuration.
interconnect-device name—(QFabric systems only) (Optional) Display information
about alarm conditions for the Interconnect device.
lcc number—(TX Matrix router and TX Matrix Plus router only) (Optional) Line-card
chassis number.
Replace number with the following values depending on the LCC configuration:
• 0 through 3, when T640 routers are connected to a TX Matrix router in a routing
matrix.
• 0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a
routing matrix.
• 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D
SIBs in a routing matrix.
• 0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with
3D SIBs in a routing matrix.
local—(MX Series routers only) (Optional) Display information about alarm conditions
for the local Virtual Chassis member.
Copyright © 2017, Juniper Networks, Inc.1846
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
