EasyManuals Logo

Juniper ACX2000 Configuration Guide

Juniper ACX2000
3270 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1919 background imageLoading...
Page #1919 background image
1 alarm currently active
Alarm time Class Description
2013-08-06 07:48:35 PDT Major CB 0 19.44 MHz clock failure
show chassis alarms (Alarms active on a PTX1000 Packet Transport Router)
user@host> show chassis alarms
2 alarms currently active
Alarm time Class Description
2004-08-10 00:55:49 UTC Major PEM 1 Not Present
2004-08-10 00:55:49 UTC Major PEM 0 Not Present
show chassis alarms (MX10003 Router)
If LCMD is down on the backup RE, then the following alarm is seen on the Master.
user@host> show chassis alarms
1 alarm currently active
Alarm time Class Description
2017-05-09 13:26:27 PDT Major VMHost RE 1 host application failed
If LCMD is down on the master, then following alarms are displayed.
user@host> show chassis alarms
3 alarms currently active
Alarm time Class Description
2017-05-10 14:12:21 PDT Major VMHost RE 0 host application failed
2017-05-10 14:12:16 PDT Minor LCM Peer Absent
2017-05-09 13:26:27 PDT Major VMHost RE 1 host application failed
If the LCMD process is crashing on the master, the system will switchover after one minute
provided the backup RE LCMD connection is stable. The system will not switchover under
the following conditions: if the backup RE LCMD connection is unstable or if the current
master just gained mastership. When the master has just gained mastership, the
switchover happens only after four minutes.
The LCM peer connection un-stable alarm is raised when the LCMD-CHASD IPC
communication flaps three times within a small interval of two to three minutes. Once
LCM peer connection un-stable alarm is raised, the connection status is monitored for
two minutes.
user@host> show chassis alarms
7 alarms currently active
Alarm time Class Description
2017-05-29 10:12:17 PDT Minor LCM Peer Connection un-stable
2017-05-29 09:04:17 PDT Minor PEM 8 Not Powered
2017-05-29 09:04:17 PDT Minor PEM 9 Not Powered
2017-05-29 09:04:17 PDT Minor PEM 7 Not Powered
2017-05-29 09:04:17 PDT Minor PEM 3 Not Powered
2017-05-29 09:04:17 PDT Minor PEM 0 Not Powered
2017-05-29 09:04:08 PDT Minor Loss of communication with Backup RE
If there are no more connection flaps within this two minutes time interval, the LCM peer
connection un-stable alarm is cleared.
6 alarms currently active
Alarm time Class Description
2017-05-29 09:04:17 PDT Minor PEM 8 Not Powered
2017-05-29 09:04:17 PDT Minor PEM 9 Not Powered
1861Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Table of Contents

Other manuals for Juniper ACX2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper ACX2000 and is the answer not in the manual?

Juniper ACX2000 Specifications

General IconGeneral
BrandJuniper
ModelACX2000
CategoryNetwork Router
LanguageEnglish

Related product manuals