Juniper ACX2000

show chassis craft-interface (TX Matrix Plus router with 3D SIBs)
user@host> show chassis craft-interface
sfc0-re0:
--------------------------------------------------------------------------
FPM Display Contents:
+--------------------+
|noname |
|48 Alarms active |
|R: LCC 2 Major Error|
|R: LCC 0 Major Error|
+--------------------+
SFC Front Panel Switch Settings:
SFC Chassis Number : 00
Config Size : 3
Front Panel System LEDs:
Routing Engine 0 1
--------------------------
OK * *
Fail . .
Master * .
Front Panel Alarm Indicators:
-----------------------------
Red LED *
Yellow LED *
Major relay *
Minor relay *
Front Panel F13 SIB LEDs:
SIB 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
--------------------------------------------------------------------
Fail . . . . . . . . . . . . . . . .
OK * . . * . . * . . . . . . . . .
Active * . . * . . * . . . . . . . . .
PS LEDs:
PS 0 1
------------
Red * .
Green . *
Fan Tray LEDs:
FT 0 1 2 3 4 5
----------------------------
Red . . . . . *
Green * * * * * .
CB LEDs:
CB 0 1
--------------
Amber . .
Green * *
Blue * .
lcc0-re0:
--------------------------------------------------------------------------
FPM Display contents:
+--------------------+
Copyright © 2017, Juniper Networks, Inc.1880
ACX Series Universal Access Router Configuration Guide