<node-device name>
<pem slot-number (interconnect-device name slot-number) | (node-device name)>
<routing-engine name <interconnect-device name slot-number>>
Syntax (OCX Series) show chassis environment
Syntax (PTX Series
Packet Transport
Routers)
show chassis environment
<cb cb-slot-number>
<ccg ccg-slot-number >
<fpc fpc-slot-number>
<fpm>
<monitored>
<pdu pdu-slot-number>
<routing-engine re-slot-number>
<sib sib-slot-number>
Syntax (ACX Series
Universal Access
Routers)
show chassis environment
<cb cb-slot-number>
<pem pem-slot-number>
<routing-engine re-slot-number>
Syntax (ACX5048 and
ACX5096 Routers)
show chassis environment
<fpc slot-number>
<pem>
<routing-engine>
Syntax (ACX500
Routers)
show chassis environment
<cb cb-slot-number>
<routing-engine re-slot-number>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
Command introduced in Junos OS Release 11.1 for QFX Series.
Command introduced in Junos OS Release 12.1x48 for PTX Series Packet Transport
Routers.
monitored option added in Junos OS Release 12.1x48 for PTX Series Packet Transport
Routers.
Command introduced in Junos OS Release 12.1 for T4000 Core Routers.
Command introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Command introduced in Junos OS Release 12.3 for MX 2020 and MX2010 3D Universal
Edge Routers.
pem option introduced in Junos OS Release 12.3 for ACX4000 Universal Access Routers.
satellite option introduced in Junos OS Release 14.2R3.
all-members, local, and member member-id options introduced in Junos OS Release 15.1
for MX2010 and MX2020 routers.
Command introduced in Junos OS Release 15.1X54-D20 for ACX5048 and ACX5096
Routers.
Command introduced in Junos OS Release 17.2 for MX2008 3D Universal Edge Routers.
1885Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
