Juniper ACX2000 Configuration Guide

Table 122: show chassis environment fpc Output Fields
Field DescriptionField Name
Status of the FPC:
• Unknown—FPC is not detected by the router.
• Empty—No FPC is present.
• Present—FPC is detected by the chassis daemon but is either not supported by the current version
of the Junos OS, or the FPC is coming up but not yet online.
• Ready—FPC is in intermediate or transition state.
• Announce online—Intermediate state during which the FPC is coming up but not yet online, and the
chassis manager acknowledges the chassisd FPC online initiative.
• Online—FPC is online and running.
• Offline—FPC is powered down.
• Diagnostics—FPC is set to operate in diagnostics mode.
State
(M40e and M160 routers and QFX Series only) Temperature of the air flowing past the FPC.Temperature
(PTX Series only) Temperature of the air flowing past the PMB (bottom of the FPC).
The PTX5000 Packet Transport Router with FPC2-PTX-P1A include multiple temperatures for PMB
(TEMP0 and TEMP1).
PMB Temperature
(PTX5000 Packet Transport Router with FPC2-PTX-P1A only) Temperature of the air flowing past
the PMB CPU.
PMB CPU Temperature
(M320 routers, MX2010 routers, MX2020 routers, MX2008 routers, and PTX Series only) Temperature
of the air flowing into the chassis.
Temperature Intake
(T Series routers only) Temperature of the air flowing past the top of the FPC.Temperature Top
(M120 and M320 routers, MX2010 routers, MX2020 routers, MX2008 routers, and PTX Series only)
Temperature of the air flowing out of the chassis.
The PTX Series Packet Transport Routers, and the MX2010, MX2020, and MX2008 routers include
exhaust temperatures for multiple zones (Exhaust A and Exhaust B).
Temperature Exhaust
(T Series routers only) Temperature of the air flowing past the bottom of the FPC.Temperature Bottom
(PTX Series only) Temperature of the air flowing past the specified TL area of the packet forwarding
engine (PFE) on the FPC.
TL n Temperature
(PTX Series only) Temperature of the air flowing past the specified TQ area of the packet forwarding
engine (PFE) on the FPC.
TQ n Temperature
(T640 router only) Temperature of the air flowing past the type 3 FPC.Temperature MMBO
(M320 and T Series routers only) Temperature of the air flowing past the type 1, type 2, and type 3
FPC.
Temperature MMB1
Information about the voltage supplied to the FPC. The left column displays the required power, in
volts. The right column displays the measured power, in millivolts.
Power
Copyright © 2017, Juniper Networks, Inc.1960
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English