Juniper ACX2000

show chassis environment pem (vMX on NFX250)
user@host> show chassis environment pem
FPC 0 PEM 0 status:
State Online
Airflow Front to Back
Temperature OK
show chassis environment pem (MX104 Router)
user@host> show chassis environment pem
PEM 0 status:
State Online
Temperature OK
DC Output: OK
Voltage:
12.0 V output 12281 mV
3.3 V output 3353 mV
PEM 1 status:
State Empty
show chassis environment pem (MX240 Router)
user@host> show chassis environment pem
PEM 0 status:
State Online
Temperature OK
DC Output: OK
PEM 1 status:
State Online
Temperature OK
DC Output: OK
show chassis environment pem (MX480 Router)
user@host> show chassis environment pem
PEM 0 status:
State Online
Temperature OK
DC Input: OK
DC Output: OK
Voltage:
PEM 1 status:
State Online
Temperature OK
DC Input: OK
DC Output: OK
Voltage:
show chassis environment pem (MX960 Router)
user@host> show chassis environment pem
PEM 2 status:
State Present
PEM 3 status:
State Online
Temperature OK
DC Output: OK
1999Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands