Juniper ACX2000 Configuration Guide

Table 126: show chassis firmware Output Fields (continued)
Field DescriptionField Name
(MX Series, MX2010, MX2020, and MX2008 routers) Version of
firmware running on the chassis part.
Version
(detail option only) Number of FPC.
For a standalone switch, the value is 0.
For a Virtual Chassis configuration, value in the range of 0-9; refers
to the member ID assigned to the switch.
FPC
(MX104 routers) Version of the compact Forwarding Engine Board.AFEB
(detail option only) Version of the SYSPLD.Boot
(detail option only) Version of the PoE firmware.PoE
(detail option only) Version of the Packet Forwarding Engine used
in the switch.
PFE-<number>
(detail option only) Version of the physical layer device (PHY) used
in the switch.
PHY-
(detail option only) Microcode of the physical layer devices (PHY)
used in the switch.
microcode
(detail option only) Version of the u-boot used in the switch.uboot
(detail option only) Version of the loader used in the switch.loader
Sample Output
show chassis firmware (M10 Router)
user@host> show chassis firmware
Part Type Version
Forwarding engine board ROM Juniper ROM Monitor Version 4.1b2
O/S Version 4.1I1 by usera on 2000-04-24 11:27
show chassis firmware (M20 Router)
user@host> show chassis firmware
Part Type Version
System switch board ROM Juniper ROM Monitor Version 3.4b26
O/S Version 3.4I16 by userc on 2000-02-29 2
FPC 1 ROM Juniper ROM Monitor Version 3.0b1
O/S Version 3.4I4 by userc on 2000-02-25 21
FPC 2 ROM Juniper ROM Monitor Version 3.0b1
O/S Version 3.4I4 by userc on 2000-02-25 21
show chassis firmware (M40 Router)
user@host> show chassis firmware
2021Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English