Juniper ACX2000

7 Empty
8 Online 31 13 0 2048 11 13
9 Online 33 10 0 2048 18 13
show chassis fpc (MX2010 Router with Fabric Grant Bypass Enabled)
Following is the output of the show chassis fpc command on an MX2010 router with
Switch Fabric Board (SFB), where fabric grant bypass is enabled by default. All MPCs
power on.
user@host> show chassis fpc
Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Online 34 20 0 2048 9 14
1 Offline 33 22 0 2048 9 14
2 Online 33 17 0 2048 9 14
3 Offline 34 25 0 2048 9 14
4 Online 32 27 0 2048 9 14
5 Offline 32 26 0 2048 9 14
6 Empty
7 Empty
8 Empty
9 Empty
show chassis fpc (MX2010 Router with Fabric Grant Bypass Disabled)
Following is the output of the show chassis fpc command on an MX2010 router with
Switch Fabric Board (SFB), where fabric grant bypass has been disabled. MPC1
(MX-MPC1-3D), MPC2 (MX-MPC2-3D), and the 16-port 10-Gigabit Ethernet MPC
(MPC-3D-16XGE-SFP) do not power on after you disable fabric grant bypass and reboot
the router. Also, FPC misconfiguration alarms are generated.
user@host> show chassis fpc
Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Online 34 20 0 2048 9 14
1 Offline ---FPC misconfiguration---
2 Online 33 17 0 2048 9 14
3 Offline ---FPC misconfiguration---
4 Online 32 27 0 2048 9 14
5 Offline ---FPC misconfiguration---
6 Empty
7 Empty
8 Empty
9 Empty
show chassis fpc pic-status (MX2010 Router with Fabric Grant Bypass Enabled)
Following is the output of the show chassis fpc pic-status command on an MX2010 router
with Switch Fabric Board (SFB), where fabric grant bypass has been enabled by default.
All MPCs power on.
user@host> show chassis fpc pic-status
Slot 0 Present MPCE Type 3 3D
Slot 1 Present MPC Type 2 3D EQ
Slot 2 Present MPCE Type 3 3D
Slot 3 Present MPC 3D 16x 10GE
2053Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands