Juniper ACX2000

Front panel contents for slot: 0
---------------------------------
LEDs status:
Alarms LED: Amber
Status LED: Green
Mode LED : Duplex
Interface LED(ADM/SPD/DPX/POE)
-------------------------------------
ge-0/0/0 Off
ge-0/0/1 Full Duplex
ge-0/0/2 Full Duplex
ge-0/0/3 Off
ge-0/0/4 Off
ge-0/0/5 Full Duplex
ge-0/0/6 Full Duplex
ge-0/0/7 Full Duplex
ge-0/0/8 Full Duplex
ge-0/0/9 Full Duplex
ge-0/0/10 Full Duplex
ge-0/0/11 Full Duplex
ge-0/0/12 Full Duplex
ge-0/0/13 Full Duplex
ge-0/0/14 Full Duplex
ge-0/0/15 Full Duplex
ge-0/0/16 Full Duplex
ge-0/0/17 Full Duplex
ge-0/0/18 Full Duplex
ge-0/0/19 Full Duplex
ge-0/0/20 Full Duplex
ge-0/0/21 Full Duplex
ge-0/0/22 Off
ge-0/0/23 Off
ge-0/0/24 Full Duplex
ge-0/0/25 Full Duplex
ge-0/0/26 Off
ge-0/0/27 Off
ge-0/0/28 Full Duplex
ge-0/0/29 Full Duplex
show chassis led node-device (QFabric System Node Device)
user@switch> show chassis led node-device node1
Front panel contents for: node1
LEDs status:
Status/Beacon LED: Yellow Blinking
Interface LINK/SPEED LED ACTIVITY LED
--------------------------------------------------------
node1:me5 Green N/A
node1:me6 Green N/A
Interface STATUS LED LINK/ACTIVITY LED
----------------------------------------------------
node1:xe-0/0/8 Green Green
node1:ge-0/0/10 Green Green
node1:ge-0/0/12 Green Green
node1:ge-0/0/24 Green Green
node1:ge-0/0/25 Green Green
node1:ge-0/0/26 Green Green
node1:ge-0/0/27 Green Green
node1:ge-0/0/28 Green Green
Copyright © 2017, Juniper Networks, Inc.2322
ACX Series Universal Access Router Configuration Guide