Juniper ACX2000 Configuration Guide

Statistics last cleared: 2012-04-03 06:40:34 PDT (00:00:53 ago)
DS1 alarms : None
DS1 defects : None
T1 media: Seconds Count State
SEF 0 0 OK
BEE 0 0 OK
AIS 0 0 OK
LOF 0 0 OK
LOS 0 0 OK
YELLOW 0 0 OK
CRC Major 0 0 OK
CRC Minor 0 0 OK
BPV 0 0
EXZ 0 0
LCV 0 0
PCV 0 0
CS 0 0
CRC 0 0
LES 0
ES 0
SES 0
SEFS 0
BES 0
UAS 0
Line encoding: B8ZS
Buildout : 0 to 132 feet
DS1 BERT configuration:
BERT time period: 10 seconds, Elapsed: 0 seconds
Induced Error rate: 0, Algorithm: 2^15 - 1, O.151, Pseudorandom (9)
Packet Forwarding Engine configuration:
Destination slot: 0 (0x00)
In the following output for the T1 interface, the parent interface is shown as ct1-0/0/0
and the link level type and encapsulation are TDM-CCC-SATOP.
user@host> show interfaces t1-0/0/0 extensive
Physical interface: t1-0/0/0, Enabled, Physical link is Up
Interface index: 160, SNMP ifIndex: 788, Generation: 1302
Link-level type: TDM-CCC-SATOP, MTU: 1504, Speed: T1, Loopback: None, FCS:
16, Parent: ct1-0/0/0 Interface index 152
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps Internal: 0x0
Link flags : None
Hold-times : Up 0 ms, Down 0 ms
CoS queues : 8 supported, 4 maximum usable queues
Last flapped : 2012-04-03 06:28:43 PDT (00:01:16 ago)
Statistics last cleared: 2012-04-03 06:29:58 PDT (00:00:01 ago)
Egress queues: 8 supported, 4 in use
Queue counters: Queued packets Transmitted packets Dropped packets
0 best-effort 0 0 0
1 expedited-fo 0 0 0
2 assured-forw 0 0 0
3 network-cont 0 0 0
Queue number: Mapped forwarding classes
0 best-effort
Copyright © 2017, Juniper Networks, Inc.194
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English