EasyManuals Logo

Juniper ACX2000 Configuration Guide

Juniper ACX2000
3270 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2698 background imageLoading...
Page #2698 background image
Table 152: show interfaces (Gigabit Ethernet) Output Fields (continued)
Level of OutputField DescriptionField Name
detail extensiveUnique number for use by Juniper Networks technical support only.Generation
Table 153: Gigabit Ethernet IQ PIC Traffic and MAC Statistics by Interface Type
CommentsByte and Octet Counts IncludeSample CommandInterface Type
The additional 4 bytes are
for the CRC.
Traffic statistics:
Input bytes: 496 bytes per packet, representing
the Layer 2 packet
MAC statistics:
Received octets: 500 bytes per packet,
representing the Layer 2 packet + 4 bytes
show interfaces
ge-0/3/0 extensive
Inbound physical
interface
Traffic statistics:
Input bytes: 478 bytes per packet, representing
the Layer 3 packet
show interfaces
ge-0/3/0.50 extensive
Inbound logical
interface
For input bytes, the
additional 12 bytes include
6 bytes for the destination
MAC address plus 4 bytes
for VLAN plus 2 bytes for
the Ethernet type.
Traffic statistics:
Input bytes: 490 bytes per packet, representing
the Layer 3 packet + 12 bytes
MAC statistics:
Received octets: 478 bytes per packet,
representing the Layer 3 packet
show interfaces
ge-0/0/0 extensive
Outbound physical
interface
Traffic statistics:
Input bytes: 478 bytes per packet, representing
the Layer 3 packet
show interfaces
ge-0/0/0.50 extensive
Outbound logical
interface
Sample Output
show interfaces (Gigabit Ethernet)
user@host> show interfaces ge-3/0/2
Physical interface: ge-3/0/2, Enabled, Physical link is Up
Interface index: 167, SNMP ifIndex: 35
Link-level type: 52, MTU: 1522, Speed: 1000mbps, Loopback: Disabled,
Source filtering: Disabled, Flow control: Enabled, Auto-negotiation: Enabled
Remote fault: Online
Device flags : Present Running
Interface flags: SNMP-Traps Internal: 0x4000
CoS queues : 4 supported, 4 maximum usable queues
Current address: 00:00:5e:00:53:7c, Hardware address: 00:00:5e:00:53:7c
Last flapped : 2006-08-10 17:25:10 PDT (00:01:08 ago)
Input rate : 0 bps (0 pps)
Output rate : 0 bps (0 pps)
Copyright © 2017, Juniper Networks, Inc.2640
ACX Series Universal Access Router Configuration Guide

Table of Contents

Other manuals for Juniper ACX2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper ACX2000 and is the answer not in the manual?

Juniper ACX2000 Specifications

General IconGeneral
BrandJuniper
ModelACX2000
CategoryNetwork Router
LanguageEnglish

Related product manuals