Table 168: show lldp Output Fields (continued)
Field DescriptionField Name
Following value used for port description TLV:
• interface-alias (ifAlias)—Indicates that the ifAlias MIB object value is used to
generate the port description TLV.
• interface-description (ifDescr)—Indicates that the ifDescr MIB object value is
used to generate the port description TLV.
For more information about port description TLV type, see port-description-type.
Port Description
TLV type
Name of the interface for which LLDP configuration information is being reported
For information about interface names, see Interface Naming Overview. For
information about interface names for TX Matrix routers, see TX Matrix Router
Chassis and Interface Names. For information about FPC numbering on TX Matrix
routers, see Routing Matrix with a TX Matrix Router FPC Numbering.
Interface
Name of the aggregated Ethernet interface, if any, to which the interface belongs.Parent Interface
LLDP operating state. The state can be Enabled or Disabled.LLDP
LLDP-MED operating state. The state can be Enabled or Disabled.LLDP-MED
LLDP power negotiation operating state. The state can be Enabled or Disabled.Power Negotiation
List of basic LLDP TLVs supported by this device (detail only).LLDP basic TLVs
supported
List of IEEE 802.1 LLDP TLVs supported by this device (detail only).LLDP 802 TLVs
supported
2731Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
