Juniper ACX2000 Configuration Guide

Sample Output
show multicast snooping next-hops
user@host> show multicast snooping next-hops
Family: INET
ID Refcount KRefcount Downstream interface Nexthop Id
1048574 4 1 ge-0/1/0.1000
ge-0/1/2.1000
ge-0/1/3.1000
1048574 4 1 ge-0/1/0.1000-(2000)
1048575
1048576
1048575 2 0 ge-0/1/2.1000-(2001)
ge-0/1/3.1000-(2002)
1048576 2 0 lsi.1048578-(2003)
lsi.1048579-(2004)
show multicast snooping next-hops (IGMP snooping enabled on a VPLS)
In thIS example, ID 1048585 is the VE next-hop ID created for the VE next hop that is
holding VE interfaces for the routing instance. It only appears if igmp snooping is enabled
on the VPLS.
user@host> show multicast snooping next-hops
Family: INET
ID Refcount KRefcount Downstream interface Addr
1048588 2 1 1048585
1048589 2 1 1048585
ge-0/0/5.100
0 2 0 ge-0/0/0.100
ge-0/0/1.100
1048583 2 1 local
1048587 2 1 local
1048585
1048586 4 2 local
1048585
ge-0/0/5.100
1048584 2 1 local
ge-0/0/5.100
1048582 6 2 ge-0/0/5.100
0 2 0 ge-0/0/0.200
ge-0/0/2.200
0 2 0 ge-0/0/0.300
ge-0/0/2.300
0 1 0 vt-0/0/10.17825792
vt-0/0/10.17825793
0 1 0 vt-0/0/10.1048576
vt-0/0/10.1048578
1048585 5 0 vt-0/0/10.1048577
vt-0/0/10.1048579
0 1 0 vt-0/0/10.34603008
vt-0/0/10.34603009
2753Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English