Juniper ACX2000 Configuration Guide

Table 175: show igmp snooping interface Output Fields (continued)
Level of OutputField DescriptionField Name
All levelsLearning domain for snooping.Learning Domain
All levelsFrequency (in seconds) with which this router sends membership queries when it is
the querier.
IGMP Query Interval
All levelsTime (in seconds) that the router waits for a response to a general query.IGMP Query
Response Interval
All levelsTime (in seconds) that the router waits for a report in response to a group-specific
query.
IGMP Last Member
Query Interval
All levelsNumber of times the router retries a query.IGMP Robustness
Count
All levelsState of immediate leave: On or Off.immediate-leave
All levelsRouter interfaces that are part of this learning domain.router-interface
All levelsMaximum number of (source,group) pairs allowed per interface. When a group limit
is not configured, this field is not shown.
Group limit
All levelsInterfaces that are being snooped in this learning domain.interface
All levelsNumber of groups on the interface.Groups
All levelsState of the interface: Up or Down.State
All levelsNumber of active multicast groups attached to the logical interface.Up Groups
All levelsTimeout for group membership. If no report is received for these groups before the
timeout expires, the group membership is removed.
IGMP Membeship
Timeout
All levelsTime that the router waits for the IGMP querier to send a query.IGMP Other Querier
Present Timeout
Sample Output
show igmp snooping interface
user@host> show igmp snooping interface ge-0/1/4
Instance: default-switch
Bridge-Domain: sample
Learning-Domain: default
Interface: ge-0/1/4.0
State: Up Groups: 0
Immediate leave: Off
Router interface: no
2755Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English