To Next Page

To Previous Page

Table 185: show ospf3 database Output Fields (continued)

Level of OutputField DescriptionField Name

detail extensiveOption bit associated with the prefix.Prefix-options

extensiveHow long until the LSA is regenerated, in the format hours:minutes:seconds.Gen timer

extensiveHow long until the LSA expires, in the format hours:minutes:seconds.Aging timer

extensiveHow long ago the route was installed, in the format hours:minutes:seconds.Installed nn:nn:nn

ago

extensiveHow long until the route expires, in the format hours:minutes:seconds.expires in nn:nn:nn

extensiveTime elapsed since the LSA was last transmitted or flooded to an adjacency

or an interface, respectively, in the format hours:minutes:seconds.

sent nn:nn:nn ago

extensiveIndicates that this is a local advertisement.Ours

IntraArPfx (Intra-Area-Prefix Link-State Advertisements)

detail extensiveLSA type of the referenced LSA.

• Router—Address prefixes are associated with a router LSA.

• Network—Address prefixes are associated with a network LSA.

Ref-lsa-type

detail extensiveLink-state ID of the referenced LSA.Ref-lsa-id

detail extensiveAdvertising router ID of the referenced LSA.Ref-router-id

detail extensiveNumber of IPv6 address prefixes contained in the LSA. The rest of the link LSA

contains a list of IPv6 prefixes to be associated with the link.

Prefix-count

detail extensiveIPv6 address prefix.Prefix

detail extensiveOption bit associated with the prefix.Prefix-options

detail extensiveCost of this prefix. Expressed in the same units as the interface costs in the

router LSAs.

Metric

extensiveHow long until the LSA is regenerated, in the format hours:minutes:seconds.Gen timer

extensiveHow long until the LSA expires, in the format hours:minutes:seconds.Aging timer

extensiveHow long ago the route was installed, in the format hours:minutes:seconds.Installed hh:mm:ss

ago

extensiveHow long until the route expires, in the format hours:minutes:seconds.expires in hh:mm:ss

extensiveTime elapsed since the LSA was last transmitted or flooded to an adjacency

or an interface, respectively, in the format hours:minutes:seconds.

sent hh:mm:ss ago

ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Configuration Guide

Other manuals for Juniper ACX2000