Table 189: show (ospf | ospf3) neighbor Output Fields (continued)
Level of OutputField DescriptionField Name
detail extensive(OSPFv3 only) If the neighbor uses virtual links, the Neighbor-address is the
site-local, local, or global address. If the neighbor uses a physical interface, the
Neighbor-address is an IPv6 link-local address.
Neighbor-address
detail extensiveArea that the neighbor is in.area
detail extensive(OSPFv3 only) Displays the OSPFv3 interface index.OSPF3-Intf-Index
detail extensiveOption bits received in the hello packets from the neighbor.opt
detail extensiveAddress of the designated router.DR or DR-ID
detail extensiveAddress of the backup designated router.BDR or BDR-ID
detail extensiveLength of time since the neighbor came up.Up
detail extensiveLength of time since the adjacency with the neighbor was established.adjacent
detail extensiveSegment routing in networking adjacency labels.
NOTE: Displayed only when segment routing is enabled
SPRING Adjacency
Labels
detail extensiveSegment routing label.Label
detail extensiveSegment routing flags. Flags VL indicate value and local.Flags
Sample Output
show ospf neighbor brief
user@host> show ospf neighbor brief
Address Intf State ID Pri Dead
192.168.254.225 fxp3.0 2Way 10.250.240.32 128 36
192.168.254.230 fxp3.0 Full 10.250.240.8 128 38
192.168.254.229 fxp3.0 Full 10.250.240.35 128 33
10.1.1.129 fxp2.0 Full 10.250.240.12 128 37
10.1.1.131 fxp2.0 Full 10.250.240.11 128 38
10.1.2.1 fxp1.0 Full 10.250.240.9 128 32
10.1.2.81 fxp0.0 Full 10.250.240.10 128 33
show ospf neighbor detail
user@host> show ospf neighbor detail
Address Interface State ID Pri Dead
10.0.6.60 lt-1/2/0.12 Full 1.1.1.60 128 38
Area 0.0.0.0, opt 0x52, DR 0.0.0.0, BDR 0.0.0.0
Up 23:53:47, adjacent 23:53:34
SPRING Adjacency Labels:
Label Flags
Copyright © 2017, Juniper Networks, Inc.2848
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
