Table 190: show ospf overview Output Fields (continued)
Level of OutputField DescriptionField name
All levelsHow long the database has been in the ignore state.Ignore time
All levelsHow long the database must stay out of the ignore or isolated state before it
returns to normal operations.
Reset time
All levelsNumber of times the database has been in the ignore state: Current and Allowed.Ignore count
All levelsGraceful restart capability: enabled or disabled.Restart
All levelsTime period for complete reacquisition of OSPF neighbors.Restart duration
All levelsTime period for which the neighbors should consider the restarting routing device
as part of the topology.
Restart grace
period
All levels(OSPFv2) Standard graceful restart helper capability (based on RFC 3623):
enabled or disabled.
Graceful restart
helper mode
All levels(OSPFv2) Restart signaling-based graceful restart helper capability (based on
RFC 4811, RFC 4812, and RFC 4813): enabled or disabled.
Restart-signaling
helper mode
All levels(OSPFv3) Graceful restart helper capability: enabled or disabled.Helper mode
extensiveOSPF-specific trace options.Trace options
extensiveName of the file to receive the output of the tracing operation.Trace file
All levelsArea number. Area 0.0.0.0 is the backbone area.Area
All levelsStub type of area: Normal Stub, Not Stub, or Not so Stubby Stub.Stub type
All levelsType of authentication: None, Password, or MD5.
NOTE: The Authentication Type field refers to the authentication configured at
the [edit protocols ospf area area-id] level. Any authentication configured for an
interface in this area will not affect the value of this field.
Authentication
Type
All levelsNumber of area border routers.Area border routers
All levelsNumber of autonomous system boundary routers.Neighbors
Sample Output
show ospf overview
user@host> show ospf overview
Instance: master
Router ID: 10.255.245.6
Route table index: 0
Configured overload, expires in 118 seconds
Copyright © 2017, Juniper Networks, Inc.2854
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
