To Next Page

To Previous Page

Table 191: show (ospf | ospf3) route Output Fields (continued)

Output LevelField DescriptionField Name

detailOptional capabilities propagated in the router LSA. This field is in the output for

intra-area router routes only (when Route Type is Area BR, AS BR, Area/AS BR,

or Router), not for interarea router routes or network routes. Three bits in this

field are defined as follows:

• 0x4 (V)—Routing device is at the end of a virtual active link.

• 0x2 (E)—Routing device is an autonomous system boundary router.

• 0x1 (B)—Routing device is an area border router.

optional-capability

detailThe priority assigned to the prefix:

• high

• medium

• low

NOTE: The priority field applies only to routes of type Network.

priority

extensiveDisplay the BGP-ORR generation identifier of the main OSPF route. This field

is shown only for non-zero values.

BGP-ORR

Generation-ID

Sample Output

show ospf route

user@host> show ospf route

Topology default Route Table:

Prefix Path Route NH Metric NextHop Nexthop

Type Type Type Interface Address/LSP

1.1.1.60/32 Intra Network Spring 6 lt-1/2/0.14 10.0.10.70

Bkup SPRING lt-1/2/0.12 10.0.6.60

1.1.1.70/32 Intra Network IP 1 lt-1/2/0.14 10.0.10.70

Bkup LSP (null)

1.1.1.70/32 Intra Network Spring 1 lt-1/2/0.14 10.0.10.70

Bkup SPRING lt-1/2/0.12 10.0.6.60

1.1.1.80/32 Intra Network IP 6 lt-1/2/0.14 10.0.10.70

Bkup IP lt-1/2/0.12 10.0.6.60

1.1.1.80/32 Intra Network Spring 6 lt-1/2/0.14 10.0.10.70

802068 (S=0) Intra Network Mpls 0 lt-1/2/0.14 10.0.10.70