Juniper ACX2000 Configuration Guide

Tcam-slice represents the hardware TCAM block, where the TCAM lookup can happen
in parallel. Tcam-group represents the logical representation of one or more tcam-slices.
Sample Output
show pfe tcam usage app <application-name>
user@host> show pfe tcam usage app fw-inet-in
App name : fw-inet-in, Precedence: 4, State: OK
Tcam-stage: Ingress, Group:7, Mode: DOUBLE
Used Errors Resource-Shortage
Tcam-Entries 1 0 0
Counters 1 0 0
Policers 0 0 0
show pfe tcam usage app <application-name> detail
user@host> show pfe tcam usage app fw-inet-in detail
App name : fw-inet-in, Precedence: 4, State: OK
Tcam-stage: Ingress, Group:7, Mode: DOUBLE
Used Errors Resource-Shortage
Tcam-Entries 1 0 0
Counters 1 0 0
Policers 0 0 0
Related Apps:
-------------
App name : fw-semantics, Precedence: 1, State: OK
Tcam-stage: Pre-Ingress, Group:1, Mode: SINGLE
Used Errors Resource-Shortage
Tcam-Entries 0 0 0
App name : fw-inet-pm, Precedence: 2, State: OK
Tcam-stage: Ingress, Group:15, Mode: SINGLE
Used Errors Resource-Shortage
Tcam-Entries 0 0 0
Counters 0 0 0
Policers 0 0 0
show pfe tcam usage app <application-name> shared-usage
user@host> show pfe tcam usage app fw-inet-in shared-usage
App name : fw-inet-in, Precedence: 4, State: OK
Tcam-stage: Ingress, Group:7, Mode: DOUBLE
Used Errors Resource-Shortage
Tcam-Entries 1 0 0
Counters 1 0 0
Policers 0 0 0
Other apps sharing the same group
----------------------------------
App name : inet_skip_mpls, Precedence: 5, State: OK
Tcam-stage: Ingress, Group:7, Mode: DOUBLE
Used Errors Resource-Shortage
Tcam-Entries 1 0 0
Counters 1 0 0
Policers 0 0 0
2871Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English