Juniper ACX2000

inet_skip_mpls 1 1 0 5 OK
Group: 5, Mode: SINGLE, Hw grps used: 1, Tcam apps: 1
Used Allocated Available Errors
Tcam-Entries 2 512 510 0
Counters 2 512 510 0
Policers 0 512 512 0
App tcam usage:
----------------
App-Name Entries Counters Policers Precedence State
Related-App-Name ..
-----------------------------------------------------------------
lo0-inet-fil 2 2 0 0 OK
Group: 8, Mode: DOUBLE, Hw grps used: 4, Tcam apps: 1
Used Allocated Available Errors
Tcam-Entries 1 512 511 0
Counters 1 1024 1023 0
Policers 0 1024 1024 0
App tcam usage:
----------------
App-Name Entries Counters Policers Precedence State
Related-App-Name ..
-----------------------------------------------------------------
fw-l2-in 1 1 0 2 OK
fw-semantics 0 X X 1 OK
Tcam Resource Stage: Egress
---------------------------
Free [hw-grps: 3 out of 3]
No dynamic tcam usage
show pfe tcam usage tcam-stage ingress
user@host> show pfe tcam usage tcam-stage ingress
Free [hw-grps: 1 out of 8]
Group: 7, Mode: DOUBLE, Hw grps used: 2, Tcam apps: 2
Used Allocated Available Errors
Tcam-Entries 2 512 510 0
Counters 2 1024 1022 0
Policers 0 1024 1024 0
Group: 5, Mode: SINGLE, Hw grps used: 1, Tcam apps: 1
Used Allocated Available Errors
Tcam-Entries 2 512 510 0
Counters 2 512 510 0
Policers 0 512 512 0
Group: 8, Mode: DOUBLE, Hw grps used: 4, Tcam apps: 1
Used Allocated Available Errors
Tcam-Entries 1 512 511 0
Counters 1 1024 1023 0
Policers 0 1024 1024 0
show pfe tcam usage tcam-stage ingress app <application-name>
user@host> show pfe tcam usage tcam-stage ingress app fw-inet-in
2873Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands