Juniper ACX2000 Configuration Guide

Table 196: show path-computation-client statistics Output
Fields (continued)
Level of OutputField DescriptionField Name
All levelsDead timer used by or for the PCE.Remote Dead
timer
All levelsInformation about type, value, and number of PC
Error messages received.
PCErr-recv
All levelsInformation about type, value, and number of PC
Error messages sent.
PCErr-sent
detailMaximum number of unknown messages received
for a PCEP session. Recommended value is 5. If the
number of unknown messages received by a PCC
or PCE is greater than or equal to the maximum
number, the PCEP session is closed.
Max unknown
messages
detailNumber of Keepalive messages received by a PCC
from a PCE.
Keepalives
received
detailNumber of Keepalive messages sent by a PCC to
a PCE.
Keepalives sent
detailTime (in seconds) the PCE is in the main
mastership state.
Elapsed as main
current
detailTime (in seconds) the PCE became main from the
last PCCD restart.
Elapsed as main
total
detailNumber of unknown messages received per minute.Unknown
msgs/min rate
detailNumber of PCEP session failures with the PCE.Session failures
detailTime (in seconds) left for LSP delegation to
timeout.
Delegation timeout
in
detailNumber of LSP delegation failures.Delegation failures
detailTime (in seconds) since the PCEP session is down.Connection down
Sample Output
show path-computation-client statistics all
user@host> show path-computation-client statistics all
PCE pce1
General
IP address : 10.209.57.166
Priority : 2
Copyright © 2017, Juniper Networks, Inc.2890
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English