show route (VPN)
The following sample output shows a VPN route with composite next hops enabled. The
first Push operation corresponds to the outer label. The second Push operation
corresponds to the inner label.
user@host> show route 192.0.2.0
13979:665001.inet.0: 871 destinations, 3556 routes (871 active, 0 holddown, 0
hidden)
+ = Active Route, - = Last Active, * = Both
192.0.2.0/24 [BGP/170] 00:28:32, localpref 100, from 10.9.9.160
AS path: 13980 ?, validation-state: unverified
> to 10.100.0.42 via ae2.0, Push 16, Push 300368(top)
[BGP/170] 00:28:28, localpref 100, from 10.9.9.169
AS path: 13980 ?, validation-state: unverified
> to 10.100.0.42 via ae2.0, Push 126016, Push 300368(top)
#[Multipath/255] 00:28:28, metric2 102
> to 10.100.0.42 via ae2.0, Push 16, Push 300368(top)
to 10.100.0.42 via ae2.0, Push 16, Push 300368(top)
show route (with Destination Prefix)
user@host> show route 172.16.0.0/12
inet.0: 10 destinations, 10 routes (9 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
172.16.0.0/12 *[Static/5] 2w4d 12:54:27
> to 192.168.167.254 via fxp0.0
show route destination-prefix detail
user@host> show route 198.51.100.0 detail
inet.0: 15 destinations, 20 routes (15 active, 0 holddown, 0 hidden)
198.51.100.0/24 (2 entries, 2 announced)
*BGP Preference: 170/-101
...
BGP-Static Preference: 4294967292
Next hop type: Discard
Address: 0x9041ae4
Next-hop reference count: 2
State: <NoReadvrt Int Ext AlwaysFlash>
Inactive reason: Route Preference
Local AS: 200
Age: 4d 1:40:40
Validation State: unverified
Task: RT
Announcement bits (1): 2-BGP_RT_Background
AS path: 4 5 6 I
show route extensive
user@host> show route extensive
v1.mvpn.0: 5 destinations, 8 routes (5 active, 1 holddown, 0 hidden)
1:65500:1:10.0.0.40/240 (1 entry, 1 announced)
*BGP Preference: 170/-101
Copyright © 2017, Juniper Networks, Inc.2956
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
