Juniper ACX2000 Configuration Guide

Table 215: show route damping Output Fields (continued)
Level of OutputField DescriptionField Name
detail extensiveAS number of the local routing device.Local AS
detail extensiveAS number of the peer routing device.Peer AS
detail extensiveHow long the route has been known.Age
detail extensiveMetric for the route.Metric
detail extensiveName of the protocol that has added the route.Task
detail extensiveList of protocols that announce this route. n-Resolve inet indicates that the route
is used for route resolution for next hops found in the routing table. n is an index
used by Juniper Networks customer support only.
Announcement bits
All levelsAS path through which the route was learned. The letters at the end of the AS
path indicate the path origin, providing an indication of the state of the route at
the point at which the AS path originated:
• I—IGP.
• E—EGP.
• ?—Incomplete; typically, the AS path was aggregated.
When AS path numbers are included in the route, the format is as follows:
• [ ]—Brackets enclose the local AS number associated with the AS path if
more than one AS number is configured on the routing device or if AS path
prepending is configured.
• { }—Braces enclose AS sets, which are groups of AS numbers in which the
order does not matter. A set commonly results from route aggregation. The
numbers in each AS set are displayed in ascending order.
• ( )—Parentheses enclose a confederation.
• ( [ ] )—Parentheses and brackets enclose a confederation set.
NOTE: In Junos OS Release 10.3 and later, the AS path field displays an
unrecognized attribute and associated hexadecimal value if BGP receives
attribute 128 (attribute set) and you have not configured an independent domain
in any routing instance.
AS path
brief noneNext hop to the destination. An angle bracket (>) indicates that the route is the
selected route.
to
brief noneInterface used to reach the next hop. If there is more than one interface available
to the next hop, the interface that is actually used is followed by the word
Selected.
via
detail extensiveCommunity path attribute for the route. See the output field table for the show
route detail command.
Communities
All levelsLocal preference value included in the route.Localpref
detail extensiveBGP router ID as advertised by the neighbor in the open message.Router ID
2997Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English