Juniper ACX2000

Table 220: show route export Output Fields
Level of OutputField DescriptionField Name
All levelsName of the routing tables that either import or export routes.Table or table-name
brief noneNumber of routes exported from this table into other tables. If a particular route
is exported to different tables, the counter will only increment by one.
Routes
brief noneWhether the table is currently exporting routes to other tables: Y or N (Yes or No).Export
detailTables currently importing routes from the originator table. (Not displayed for
tables that are not exporting any routes.)
Import
detail(instance keyword only) Flags for this feature on this instance:
• config auto-policy—The policy was deduced from the configured IGP export
policies.
• cleanup—Configuration information for this instance is no longer valid.
• config—The instance was explicitly configured.
Flags
detail(instance keyword only) Configured option displays the type of routing tables the
feature handles:
• unicast—Indicates instance.inet.0.
• multicast—Indicates instance.inet.2.
• unicast multicast—Indicates instance.inet.0 and instance.inet.2.
Options
detail(instance keyword only) Policy that routeexport uses to construct the import-export
matrix. Not displayed if the instance type is vrf.
Import policy
detail(instance keyword only) Name of the routing instance.Instance
detail(instance keyword only) Type of routing instance: forwarding, non-forwarding, or
vrf.
Type
Sample Output
show route export
user@host> show route export
Table Export Routes
inet.0 N 0
black.inet.0 Y 3
red.inet.0 Y 4
show route export detail
user@host> show route export detail
inet.0 Routes: 0
black.inet.0 Routes: 3
Import: [ inet.0 ]
red.inet.0 Routes: 4
Import: [ inet.0 ]
3023Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands