Juniper ACX2000 Configuration Guide

Table 225: show route receive-protocol Output Fields (continued)
Level of OutputField DescriptionField Name
All levelsNext hop to the destination. An angle bracket (>) indicates that the route is the
selected route.
Next hop
All levelsLocal preference value included in the route.Localpref or Lclpref
All levelsAutonomous system (AS) path through which the route waslearned. The letters
at the end of the AS path indicate the path origin, providing an indication of the
state of the route at the point at which the AS path originated:
• I—IGP.
• E—EGP.
• ?—Incomplete; typically, the AS path was aggregated.
When AS path numbers are included in the route, the format is as follows:
• [ ]—Brackets enclose the number that precedes the AS path. This number
represents the number of ASs present in the AS path, when calculated as
defined in RFC 4271. This value is used the AS-path merge process, as defined
in RFC 4893.
• [ ]—If more than one AS number is configured on the router, or if AS path
prepending is configured, brackets enclose the local AS number associated
with the AS path.
• { }—Braces enclose AS sets, which are groups of AS numbers in which the
order does not matter. A set commonly results from route aggregation. The
numbers in each AS set are displayed in ascending order.
• ( )—Parentheses enclose a confederation.
• ( [ ] )—Parentheses and brackets enclose a confederation set.
NOTE: In Junos OS Release 10.3 and later, the AS path field displays an
unrecognized attribute and associated hexadecimal value if BGP receives
attribute 128 (attribute set) and you have not configured an independent domain
in any routing instance.
AS path
detail extensiveStack of labels carried in the BGP route update.Route Labels
detail extensive(For route reflected output only) Cluster ID sent by the route reflector.Cluster list
detail extensive(For route reflected output only) Address of routing device that originally sent
the route to the route reflector.
Originator ID
detail extensiveCommunity path attribute for the route. See the Output Field table in the show
route detail command for all possible values for this field.
Communities
detail extensiveAccumulated interior gateway protocol (AIGP) BGP attribute.AIGP
detail extensiveNumber, local preference, and path of the AS that originated the route. These
values are stored in the Attrset attribute at the originating routing device.
Attrset AS
detail extensiveLayer 2 encapsulation (for example, VPLS).Layer2-info:encaps
detail extensiveControl flags: none or Site Down.control flags
Copyright © 2017, Juniper Networks, Inc.3108
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English