Juniper ACX2000 Configuration Guide

Local AS: 4170512532
Age: 6:05
Validation State: unverified
Task: IS-IS
Announcement bits (1): 0-BGP_RT_Background
AS path: I
Prefix SID: 67, Flags: 0x40, Algo: 0
show route table l2circuit.0
user@host> show route table l2circuit.0
l2circuit.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.1.1.195:NoCtrlWord:1:1:Local/96
*[L2CKT/7] 00:50:47
> via so-0/1/2.0, Push 100049
via so-0/1/3.0, Push 100049
10.1.1.195:NoCtrlWord:1:1:Remote/96
*[LDP/9] 00:50:14
Discard
10.1.1.195:CtrlWord:1:2:Local/96
*[L2CKT/7] 00:50:47
> via so-0/1/2.0, Push 100049
via so-0/1/3.0, Push 100049
10.1.1.195:CtrlWord:1:2:Remote/96
*[LDP/9] 00:50:14
Discard
show route table mpls
user@host> show route table mpls
mpls.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
0 *[MPLS/0] 00:13:55, metric 1
Receive
1 *[MPLS/0] 00:13:55, metric 1
Receive
2 *[MPLS/0] 00:13:55, metric 1
Receive
1024 *[VPN/0] 00:04:18
to table red.inet.0, Pop
show route table mpls extensive
user@host> show route table mpls extensive
100000 (1 entry, 1 announced)
TSI:
KRT in-kernel 100000 /36 -> {so-1/0/0.0}
*LDP Preference: 9
Next hop: via so-1/0/0.0, selected
Pop
State: <Active Int>
Age: 29:50 Metric: 1
Task: LDP
Announcement bits (1): 0-KRT
AS path: I
Prefixes bound to route: 10.0.0.194/32
3133Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English