Juniper ACX2000 Configuration Guide

Results
In this example, the PTP slave on the local interface ge-0/2/0 is assigned a local IP
address of 12.1.1.5. Unicast-negotiation is not configured so the PTP master must be
explicitly configured with the details of the PTP slave (12.1.1.5).
[edit protocols]
user@host# show
ptp {
clock-mode ordinary;
ipv4-dscp 46;
slave {
interface ge-0/2/0.0 {
unicast-mode {
transport ipv4;
clock-source 12.1.1.4 local-ip-address 12.1.1.5;
}
}
}
}
Related
Documentation
IEEE 1588v2 Precision Timing Protocol (PTP) on ACX Series Universal Access Routers
on page 237
•
• slave
• unicast-mode
263Copyright © 2017, Juniper Networks, Inc.
Chapter 9: Configuring Timing and Synchronization

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English