Juniper ACX2000 Configuration Guide

Table 238: show validation session Output Fields (continued)
Level of
OutputField DescriptionField Name
All levelsState of the connection between the routing device and the cache
server. Up means that the connection is established. Connect means
that the connection is not established.
State
None and
brief
Number of attempts to establish a session.Flaps
None and
brief
Length of time that the session has remained establshed.Uptime
None and
brief
Number of IPv4 and IPv6 route validation records.#IPv4/IPv6 records
detailEvery session has an index number.Session index
detailName of the group to which the session belongsGroup
detailEach cache server has a preference. Higher preferences are preferred.
During a session start or restart, the routing device attempts to start
a session with the cache server that has the numerically highest
preference. The routing device connects to multiple cache servers
in preference order.
The default preference is 100. The preference is configurable with
the preference statement.
Preference
detailTCP port number for the outgoing connection with the cache server.
The well-known RPKI port is TCP port 2222. For a given deployment,
an RPKI cache server might listen on some other TCP port number.
If so, you can configure the alternative port number with the port
statement.
Port
detailLiveliness check interval for an RPKI cache server. Everyrefresh-time
(seconds), a serial query protocol data unit (PDU) with the last
known serial number is transmitted. The hold-time must be at least
2 x the refresh-time.
Refresh time
detailLength of time in seconds that the session between the routing
device and the cache server is considered operational without any
activity. After the hold time expires, the session is dropped.
Reception of any PDU from the cache server resets the hold timer.
The hold-time is 600 seconds, by default, and must be least 2 x the
refresh-time. If the hold time expires, the session is considered to be
down. This, in turn, triggers a session restart event. During a session
restart, the routing device attempts to start a session with the cache
server that has the numerically highest preference.
Hold time
3189Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English