SSU-B 96
SEC 104
Meaning The output for run show ptp global-information displays the parameters set in Synchronous
Ethernet mode and the parameters set for the master and the slave.
The output of run show ptp quality-level-mapping displays the default mapping of the
clock class to the ESMC quality level.
Verifying Global Information Parameters After Configuring User-Defined Mapping
of the PTP Clock Class to the ESMC Quality Level in Hybrid Mode
Purpose Verify the global information parameters after configuring a user-defined mapping of
the PTP clock class to the ESMC quality level in hybrid mode by disabling the
convert-clock-class-to-quality-level option.
Action In operational mode, enter the run show ptp global-information command to display the
following output:
user@host> run show ptp global-information
PTP Global Configuration:
Domain number : 0
Transport Encapsulation : IPv4
Clock mode : Ordinary
Priority Level1 : 128
Priority Level2 : 128
Unicast Negotiation : Disabled
ESMC QL From Clock Class: Disabled
Clock Class/ESMC QL : -
Slave Parameters:
Sync Interval : -
Delay Request Interval: -6 (64 packets per second)
Announce Interval : -
Announce Timeout : 3
Master Parameters:
Sync Interval : -6 (64 packets per second)
Delay Request Interval: -
Announce Interval : 1 (1 packet every 2 seconds)
Clock Step : one-step
Meaning The output displays the parameters set in Synchronous Ethernet mode and the
parameters set for the master and the slave.
Related
Documentation
Guidelines for Configuring Hybrid Mode on ACX Series Routers on page 290•
• Hybrid Mode on ACX Series Routers Overview on page 288
• Configuring Hybrid Mode and ESMC Quality Level Mapping on ACX Series Routers on
page 292
Copyright © 2017, Juniper Networks, Inc.300
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
