Juniper ACX2000

[edit bridge-domains bridge-domain-name forwarding-options dhcp-security
option-82]
user@device# set circuit-id prefix (host-name | routing-instance-name)
3. Specify that the circuit ID suboption value contains the interface description rather
than the interface name (the default):
[edit bridge-domains bridge-domain-name forwarding-options dhcp-security
option-82]
user@device# set circuit-id use-interface-description
4. Specify that the circuit ID suboption value contains the VLAN ID rather than the VLAN
name (the default):
[edit bridge-domains bridge-domain-name forwarding-options dhcp-security
option-82]
user@device# set circuit-id use-vlan-id
5. Specify that the remote ID suboption is included in the DHCP option 82 information:
[edit bridge-domains bridge-domain-name forwarding-options dhcp-security
option-82]
user@device# set remote-id
NOTE: If you do not specify a keyword after remote-id, the default value
for the remote-id suboption is the interface name.
6. Specify that the remote ID suboption is the hostname of the switch:
[edit bridge-domains bridge-domain-name forwarding-options dhcp-security
option-82]
user@device# set remote-id host-name
7. Specify that the remote ID suboption value contains the interface description:
[edit bridge-domains bridge-domain-name forwarding-options dhcp-security
option-82]
user@device# set remote-id use-interface-description
8. Specify that the remote ID suboption value contains a character string:
[edit bridge-domains bridge-domain-name forwarding-options dhcp-security
option-82]
user@device# set remote-id use-string mystring
9. Configure a vendor ID suboption:
•
To use the default value (the default value is Juniper), do not type a character string
after the vendor-id option keyword:
[edit bridge-domains bridge-domain-name forwarding-options dhcp-security
option-82]
user@device# set vendor-id
397Copyright © 2017, Juniper Networks, Inc.
Chapter 11: Configuring DHCP and DHCPv6 Relay Agent