Juniper ACX2000

no-partition interface-type at;
}
ge-0/2/0 {
unit 0 {
family inet {
address 20.1.1.2/24;
}
family mpls;
}
}
lo0 {
unit 0 {
family inet {
address 70.1.1.1/32;
}
}
}
}
protocols {
rsvp {
interface ge-0/2/0.0;
}
mpls {
no-cspf;
label-switched-path PE1-to-PE2 {
to 40.1.1.1;
}
interface ge-0/2/0.0;
}
ospf {
traffic-engineering;
area 0.0.0.0 {
interface ge-0/2/0.0;
interface lo0.0 {
passive;
}
}
}
ldp {
interface ge-0/2/0.0;
interface lo0.0;
}
l2circuit {
neighbor 40.1.1.1 {
interface at-0/0/0.0 {
virtual-circuit-id 1;
}
}
}
}
Related
Documentation
Pseudowire Overview for ACX Series Universal Access Routers on page 590•
• ATM Pseudowire Overview on page 173
595Copyright © 2017, Juniper Networks, Inc.
Chapter 20: Configuring MPLS and Pseudowires