Juniper ACX2000 - Page 702

interface ge-0/1/3.0;
interface lo0.0;
}
mpls {
label-switched-path to_PE3 {
to 192.168.0.103;
}
label-switched-path to_PE2 {
to 192.168.0.102;
}
interface ge-0/1/1.0;
interface ge-0/1/2.0;
interface ge-0/1/3.0;
}
bgp {
local-address 192.168.0.101;
group ibgp {
family inet-vpn {
any;
}
peer-as 64511;
neighbor 192.168.0.102;
neighbor 192.168.0.103;
}
}
isis {
interface ge-0/1/1.0;
interface ge-0/1/2.0;
interface ge-0/1/3.0;
interface lo0.0;
}
ldp {
interface ge-0/1/1.0;
interface ge-0/1/2.0;
interface ge-0/1/3.0;
interface lo0.0;
}
l2circuit {
neighbor 192.168.0.100 {
interface lt-1/2/0.600 {
virtual-circuit-id 1;
pseudowire-status-tlv hot-standby-vc-on;
}
}
}
user@PE1# show policy-options
policy-statement l3vpn_export {
term primary {
from condition primary;
then {
local-preference add 300;
community set l3vpn;
accept;
}
}
Copyright © 2017, Juniper Networks, Inc.644
ACX Series Universal Access Router Configuration Guide