DescriptionFlag
Trace bootstrap messages, which are sent periodically
by the PIM domain's bootstrap router and are forwarded,
hop by hop, to all routers in that domain.
bootstrap
Trace general events.general
Trace graft and graft acknowledgment messages.graft
Trace hello packets, which are sent so that neighboring
routers can discover one another.
hello
Trace join messages, which are sent to join a branch onto
the multicast distribution tree.
join
Trace messages related to multicast data tunnels.mdt
Trace normal events.normal
Trace nonstop routing synchronization eventsnsr-synchronization
Trace all PIM packets.packets
Trace poison-route-reverse packets.policy
Trace prune messages, which are sent to prune a branch
off the multicast distribution tree.
prune
Trace register and register-stop messages. Register
messages are sent to the RP when a multicast source first
starts sending to a group.
register
Trace routing information.route
Trace candidate RP advertisements.rp
Trace state transitions.state
Trace task processing.task
Trace timer processing.timer
In the following example, tracing is enabled for all routing protocol packets. Then tracing
is narrowed to focus only on PIM packets of a particular type.
To configure tracing operations for PIM:
1. (Optional) Configure tracing at the [routing-options hierarchy level to trace all protocol
packets.
[edit routing-options traceoptions]
Copyright © 2017, Juniper Networks, Inc.686
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
