Action From operational mode, run the show mpls lsp extensive command.
user@PCC> show mpls lsp extensive
Ingress LSP: 2 sessions
128.102.177.16
From: 128.102.180.228, State: Up, ActiveRoute: 0, LSPname: lsp1-pcc
ActivePath: (primary)
LSPtype: Static Configured, Penultimate hop popping
LoadBalance: Random
Encoding type: Packet, Switching type: Packet, GPID: IPv4
*Primary State: Up
Priorities: 7 0
SmartOptimizeTimer: 180
Computed ERO (S [L] denotes strict [loose] hops): (CSPF metric: 2)
1.2.1.2 S 2.3.0.2 S
Received RRO (ProtectionFlag 1=Available 2=InUse 4=B/W 8=Node 10=SoftPreempt
20=Node-ID):
1.2.1.2 2.3.0.2
6 Jul 12 14:44:10.620 Selected as active path
5 Jul 12 14:44:10.617 Record Route: 1.2.1.2 2.3.0.2
4 Jul 12 14:44:10.615 Up
3 Jul 12 14:44:10.175 Originate Call
2 Jul 12 14:44:10.174 CSPF: computation result accepted 1.2.1.2 2.3.0.2
1 Jul 12 14:43:41.442 CSPF failed: no route toward 128.102.177.16[2 times]
Created: Tue Jul 12 14:42:43 2016
128.102.177.16
From: 128.102.180.228, State: Up, ActiveRoute: 0, LSPname: lsp2-pcc
ActivePath: (primary)
LSPtype: Externally controlled - static configured, Penultimate hop popping
LSP Control Status: Externally controlled
LoadBalance: Random
Encoding type: Packet, Switching type: Packet, GPID: IPv4
*Primary State: Up
Priorities: 7 0
External Path CSPF Status: external
SmartOptimizeTimer: 180
Received RRO (ProtectionFlag 1=Available 2=InUse 4=B/W 8=Node 10=SoftPreempt
20=Node-ID):
1.2.4.2 2.3.0.2
50 Jul 12 14:50:14.699 EXTCTRL LSP: Sent Path computation request and LSP
status
49 Jul 12 14:50:14.698 EXTCTRL_LSP: Computation request/lsp status contains:
signalled bw 0 req BW 0 admin group(exclude 0 include any 0 include all 0)
priority setup 7 hold 0
48 Jul 12 14:49:27.859 EXTCTRL LSP: Sent Path computation request and LSP
status
47 Jul 12 14:49:27.859 EXTCTRL_LSP: Computation request/lsp status contains:
signalled bw 0 req BW 0 admin group(exclude 0 include any 0 include all 0)
priority setup 7 hold 0
46 Jul 12 14:49:27.858 EXTCTRL LSP: Sent Path computation request and LSP
status
45 Jul 12 14:49:27.858 EXTCTRL_LSP: Computation request/lsp status contains:
signalled bw 0 req BW 0 admin group(exclude 0 include any 0 include all 0)
priority setup 7 hold 0
44 Jul 12 14:49:27.858 EXTCTRL_LSP: Control status became external
43 Jul 12 14:49:03.746 EXTCTRL_LSP: Control status became local
42 Jul 12 14:46:52.367 EXTCTRL LSP: Sent Path computation request and LSP
status
Copyright © 2017, Juniper Networks, Inc.748
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
