Juniper ACX2000 Configuration Guide

Table 6: CLI Equivalents of Terms Used in Documentation for ACX500 Outdoor Routers with
PoE
Additional InformationItem in Documentation
Value (as
Displayed in the
CLI)
Description (as
Displayed in the CLI)
Hardware
Item (as
Displayed
in the CLI)
Chassis Physical
Specifications for ACX500
Routers
Router chassis–ACX500Chassis
Interface Naming Conventions
Used in the Junos OS
Operational Commands
The router does not have
actual FPCs. In this case,
FPC refers to the router
itself.
Value of n is always
0.
Abbreviated name of the
Flexible PIC Concentrator
(FPC)
FPC (n)
Interface Naming Conventions
Used in the Junos OS
Operational Commands
The router does not have
actual PIC devices; see
entries for PIC 0 through PIC
1 for the equivalent item on
the router.
n is a value in the
range of 0–1.
Abbreviated name of the
Physical Interface Card
(PIC)
PIC (n)
ACX500 Universal Access
Router Overview
Built-in uplink ports on the
front panel of the router
PIC 03x 1GE (SFP)
ACX500 Universal Access
Router Overview
Built-in uplink ports on the
front panel of the router
PIC 13x 1GE (RJ-45 with PoE+
support)
Uplink Ports on ACX500
Routers
Optical transceiversn is a value
equivalent to the
number of the port
in which the
transceiver is
installed.
Abbreviated name of the
transceiver
Xcvr (n)
ACX500 Power OverviewDC power supplyValue of n is always
0.
Built-in power supplyPower
supply (n)
Cooling System and Airflow in
ACX500 Routers
Fan–Fan
NOTE: ACX500 routers
are fanless.
Fan
29Copyright © 2017, Juniper Networks, Inc.
Chapter 1: ACX Series Universal Access Router Overview

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English