Juniper ACX2000

route-distinguisher (as-number:id | ip-address:id);
router-id address;
routing-options {
autonomous-system autonomous-system {
independent-domain;
loops number;
}
forwarding-table {
export [ policy-names ];
}
interface-routes {
rib-group group-name;
}
martians {
destination-prefix match-type <allow>;
}
maximum-paths {
path-limit;
log-interval interval;
log-only;
threshold percentage;
}
maximum-prefixes {
prefix-limit;
log-interval interval;
log-only;
threshold percentage;
}
multipath {
vpn-unequal-cost;
}
options {
syslog (level level | upto level);
}
rib routing-table-name {
martians {
destination-prefix match-type <allow>;
}
multipath {
vpn-unequal-cost;
}
static {
defaults {
static-options;
}
route destination-prefix {
next-hop [next-hops];
static-options;
}
}
}
}
static {
defaults {
static-options;
}
829Copyright © 2017, Juniper Networks, Inc.
Chapter 26: Configuring Layer 3 VPNs