Table 12: CLI Equivalents of Terms Used in Documentation for ACX4000 Routers
Additional InformationItem in Documentation
Value (as displayed
in the CLI)
Description (as
displayed in the CLI)
Hardware
Item (as
displayed
in the CLI)
Chassis Physical
Specifications for
ACX4000 Routers
Router chassis–ACX4000Chassis
Interface Naming
Conventions Used in the
Junos OS Operational
Commands
The router does not have actual
FPC devices; see entries for
FPC 0 and FPC 1 for the
equivalent item on the router.
Value of n is a value
in the range of 0–1.
Abbreviated name of
the Flexible PIC
Concentrator (FPC)
ACX4000
FPC (n)
Refers to the built-in FPC that
houses the built-in network ports.
FPC 0FPC BUILTIN
Slots in which one or two MICs
are installed
FPC 1FPC BUILTIN
Interface Naming
Conventions Used in the
Junos OS Operational
Commands
The router supports up to two
MICs and has built-in interfaces,
both represented as PIC in the
CLI; see entries for PIC 0 through
PIC 2 for the equivalent item on
the router.
n is a value in the
range of 0–2.
Abbreviated name of
the Modular Interface
Cards (MICs) or built-in
interfaces
PIC (n)
ACX4000 Uplink Ports
Overview
Built-in network ports on the
front panel of the router
FPC 0, PIC 08x 1GE(LAN) SFP, RJ45
ACX4000 Uplink Ports
Overview
Built-in network ports on the
front panel of the router
FPC 0, PIC 12x 1GE(LAN) SFP
ACX4000 Uplink Ports
Overview
Built-in network ports on the
front panel of the router
FPC 0, PIC 22x 10GE(LAN) SFP+
ACX4000 Modular
Interface Card (MIC)
Overview
MIC installed in slot 0FPC 1, PIC 0<MIC 0 description>
MIC installed in slot 1FPC 1, PIC 1<MIC 1 description>
Optical transceiversn is a value equivalent
to the number of the
port in which the
transceiver is
installed.
Abbreviated name of
the transceiver
Xcvr (n)
ACX4000 Power OverviewAC or DC power supplyValue of n is a value
in the range of 0–1.
Power supplyPEM (n)
Copyright © 2017, Juniper Networks, Inc.38
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
