•
Family inet
A group of 250 entries of policers shared with other family-inet filters.
A maximum of about 125 policers when no other family-inet filters with the count
action.
Along with 125 policers, you can define up to 62 family-inet filters without the count
action.
•
The hierarchical policer supports the same policer ranger and burst size behavior as
normal policers.
•
You must configure the same hierarchical policer mode for all child policers that refer
or link with the same parent policer instance.
•
You cannot use the same policer template as both a normal policer and a child policer.
•
You cannot use the same base policer settings as both a normal policer and an
aggregate or hierarchical policer.
•
You cannot use the filter-specific statement at the [edit firewall policer policer-name]
hierarchy level to instantiate an aggregate policer. Instead, the instantiation of the
policer is performed by including the aggregate statement at the [edit firewall policer
policer-name] hierarchy level.
•
All the child policers of a certain aggregate policer must contain the same definitions
of settings or attributes.
•
All the policer instantiation formats are supported for the aggregate policer.
•
Ingress two-level hierarchical policing is supported on all ACX routers.
•
All the supported match conditions for filters used with normal policers are supported
with micro-flow policers.
•
You can configure up to 32 hierarchical policer instances. You can configure up to 32
child policers per macro policer instance.
•
You can configure hierarchical policers on aggregated Ethernet interfaces.
NOTE: Hierarchical policers is not applicable on ACX5048 and ACX5096
routers.
Related
Documentation
Hierarchical Policers on ACX Series Routers Overview on page 920•
• Hierarchical Policer Modes on page 923
• Processing of Hierarchical Policers on page 928
• Actions Performed for Hierarchical Policers on page 929
• Configuring Aggregate Parent and Child Policers on ACX Series Routers on page 931
Copyright © 2017, Juniper Networks, Inc.922
ACX Series Universal Access Router Configuration Guide