Juniper ACX2000 Configuration Guide

3. Define the aggregate parent policer as the global policer for the system. The
aggregate-sharing-mode option is a Packet Forwarding Engine statement.
user@host# set policer mi_pol_x if-exceeding bandwidth-limit 55m
user@host# set policer mi_pol_x if-exceeding burst-size-limit 35k
user@host# set policer mi_pol_x aggregate global
4. Verify the settings of all policer templates configured by using the show filter policer
template command.
user@host# show filter policer template
AppType Template name Bw limit-bits/sec Burst-bytes Action
Options
------- ------------- ----------------- -----------
--------------
0 mi_pol_1
25000000 3000 DROP
Aggregate Child of mi_pol_x mode=2
0 mi_pol_2
30000000 30000 DROP
Aggregate Child of mi_pol_x mode=2
0 mi_pol_x
55000000 35000 DROP
Aggregate Parent
5. View the configured policer instances that are linked to the aggregate parent policer
by using the show filter aggregate-policer command.
user@host# show filter aggregate-policer p1
CHILDREN
-------
#1) [UNI1_filtermi_pol_trtcm1-t2] CBS[1000]kB; CIR[10000]kbps; CBS[2000]kB;
PIR[30000]kbps; Agg mode = 3;
#2) [UNI2_filtermi_pol_trtcm2-t2] CBS[1000]kB; CIR[15000]kbps; CBS[2000]kB;
PIR[35000]kbps; Agg mode = 3;
PARENT
------
[p1] PBS[3000]kB; PIR[38000]kbps;
Sum child CIR[25000]kbps;CBS[2000]kB;
Sum child PIR[65000]kbps;PBS[4000]kB;
Max child CIR[15000]kbps;CBS[1000]kB;
Max child PIR[35000]kbps;PBS[2000]kB;
RESULTS
-------
STATUS = OK
Related
Documentation
Hierarchical Policers on ACX Series Routers Overview on page 920•
• Guidelines for Configuring Hierarchical Policers on ACX Routers on page 921
• Hierarchical Policer Modes on page 923
Copyright © 2017, Juniper Networks, Inc.932
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English