Table 82: Features Using TCAM Resource
TCAM StageFeature/FunctionalityTCAM Apps/TCAM Users
EgressBridge domain dual-tagged validate
NOTE: This feature is not supported on ACX5048 and ACX5096
routers.
bd-dtag-validate
EgressBridge domain vlan-map with swap tpid operationbd-tpid-swap
IngressConnectivity fault management implicit bridge-domain filterscfm-bd-filter
IngressConnectivity fault management implicit filterscfm-filter
IngressConnectivity fault management implicit vpls filters
NOTE: This feature is supported only on ACX5048 and ACX5096
routers.
cfm-vpls-filter
IngressConnectivity fault management implicit vpls logical interface filters
NOTE: This feature is supported only on ACX5048 and ACX5096
routers.
cfm-vpls-ifl-filter
Pre-ingressLogical interface level fixed classifiercos-fc
IngressCircuit cross-connect family ingress firewallfw-ccc-in
EgressFamily level egress firewallfw-family-out
Pre-ingressFirewall filter-based forwardingfw-fbf
Pre-ingressFirewall filter-based forwarding for inet6 familyfw-fbf-inet6
IngressLogical interface level ingress firewallfw-ifl-in
EgressLogical interface level egress firewallfw-ifl-out
IngressInet family ingress firewall on a forwarding-tablefw-inet-ftf
IngressInet6 family ingress firewall on a forwarding-tablefw-inet6-ftf
IngressInet family ingress firewallfw-inet-in
IngressInet family ingress firewall on RPF fail checkfw-inet-rpf
IngressInet6 family ingress firewallfw-inet6-in
EgressInet6 Family level egress firewallfw-inet6-family-out
IngressInet6 family ingress firewall on a RPF fail checkfw-inet6-rpf
1159Copyright © 2017, Juniper Networks, Inc.
Chapter 34: Configuring Operations, Administration, and Management (OAM)
To Next Page
Loading...
Need help?
General
